Self-Optimization of the Active Site of Molybdenum Disulfide by an Irreversible Phase Transition during Photocatalytic Hydrogen Evolution

The metallic 1T-MoS₂ has attracted considerable attention as an effective catalyst for hydrogen evolution reactions (HERs). However, the fundamental mechanism about the catalytic activity of 1T-MoS₂ and the associated phase evolution remain elusive and controversial. Herein, we prepared the most stable 1T-MoS₂ by hydrothermal exfoliation of MoS₂ nanosheets vertically rooted into rigid one-dimensional TiO₂ nanofibers. The 1T-MoS₂ can keep highly stable over one year, presenting an ideal model system for investigating the HER catalytic activities as a function of the phase evolution. Both experimental studies and theoretical calculations suggest that 1T phase can be irreversibly transformed into a more active 1T′ phase as true active sites in photocatalytic HERs, resulting in a “catalytic site self-optimization”. Hydrogen atom adsorption is the major driving force for this phase transition.     

Azodicarboxylate-Mediated Peptide Cyclisation: Application to Disulfide Bond Formation in Solution and Solid Phase

Cyclic peptides are important molecules, playing key roles in protein architecture, as chemical probes, and increasingly as crucial structural elements of clinically-useful therapeutics. Herein we report methodology using azodicarboxylates as efficient reagents for the facile synthesis of cyclic peptides through a disulfide bridge. The utility of this approach in both solution and solid-phase, and compatibility with common amino acid side chain functionalities is demonstrated, resulting in cyclic peptides in good yield and purity. This approach has significant potential application for synthesis of molecules of biological or therapeutic significance.     

Fabrication of a novel electrochemical sensor based on tin disulfide/multi-walled carbon nanotunbes-modified electrode for rutin determination in natural vegetation

A tin disulfide and multi-walled carbon nanotube (SnS₂/CNTs) electrochemical sensor was constructed for the sensitive and selective determination of rutin in plants. Tin disulfide nanoflowers with various particle sizes were prepared by controlling the reaction time and composited with multi-walled CNTs. The morphology, crystal structure, and chemical composition of these SnS₂/CNTs composites were characterized using XRD, XPS, and SEM-EDS. Results illustrated that the SnS₂/CNTs had a large specific surface area, good conductivity, and remarkable electrocatalytic performance. The pH of the buffer solution, the scanning rate, and the amount of modified material were also optimized for the rapid detection of rutin. A 2-electron-2-proton mechanism, involving a few rapid and consecutive stages, was speculated to occur during rutin oxidation, based on the observed slope of -53 mV/pH. There was an appreciable linear relationship between the reductive peak current from DPV and the rutin concentration, ranging from 0.005-0.05 µmol/L and 0.1-6 µmol/L, with a detection limit of 0.22 nmol/L (S/N = 3). The sensor also demonstrated good selectivity, excellent sensitivity, and reproducibility when analyzing rutin in real plant samples, with satisfactory recovery, and was also highly consistent with results of HPLC, and thus could be used to evaluate the medicinal value of natural vegetation.     

纳米二硫化钼的掺杂及催化电解水产氢的研究进展

电催化水分解制氢是可以形成闭环的生产过程, 起始原料与副产物均为水、 过程清洁无污染, 是极具希望的产氢策略. 目前制约其发展的瓶颈之一是价格昂贵的Pt基贵金属催化剂. 为推动电催化分解水制氢的普及, 亟待开发低成本非贵金属催化剂. 在众多备选非贵金属催化材料中, 纳米层状结构二硫化钼(MoS₂)因催化效果可期、 价格低而获得了广泛关注. 然而, 通常条件下易于获得的层状结构2H相MoS₂大面积的基面部分显示惰性, 仅在片层边缘处存在少量活性位点, 且导电性较差, 因而尚不能替代Pt基催化剂, 而如何增加其活性位点数量和提高其导电性成为亟待解决的问题; 另一方面, 1T相MoS₂虽然活性高、 导电性好, 但却存在制备困难及稳定性差的问题. 鉴于此, 研究者通过对纳米MoS₂进行掺杂改性实现了其活性与稳定性的有效提升. 本文对非贵金属纳米MoS₂催化剂掺杂改性的方法、 机理及其电催化水解制氢性能的相关研究进行了总结与讨论. 作为典型的非贵金属电解水析氢催化剂, MoS₂具有巨大发展潜力, 本文能够对相关非贵金属催化剂的研发提供有益的参考.     

碳掺杂六方氮化硼/二硫化钼吸附还原六价铬和助催化降解有机污染物

针对二硫化钼(MoS₂)因易团聚导致去除六价铬[Cr(Ⅵ)]容量低的问题, 利用六方氮化硼(BN)良好的吸附性和化学稳定性, 以多巴胺作为BN改性剂, 通过煅烧法和水热法制得碳掺杂六方氮化硼(c-BN)负载MoS₂纳米复合材料(c-BN@MoS₂). 研究了室温条件下c-BN@MoS₂对Cr(Ⅵ)的吸附还原和助催化降解有机污染物的性能. 实验结果表明, c-BN@MoS₂在40 min内对50 mg/L的Cr(Ⅵ)吸附还原去除率高达95%以上, 且以将 Cr(Ⅵ)还原至Cr(Ⅲ)为主, 在pH值为2、 温度为25 ℃条件下去除Cr(Ⅵ)最大容量可达401 mg/g, 显著高于 MoS₂(98 mg/g). 分析显示, c-BN不仅提高了MoS₂的平均孔径, 还可促进MoS₂生成金属特性的1T相, 有利于吸附Cr(Ⅵ)和加快氧化还原过程中的电子转移. 在Fe²⁺/PMS(过一硫酸氢盐)催化体系加入c-BN@MoS₂, 该体系对磺胺甲恶唑的降解性能明显增强, 其反应速率常数提高3倍, 这主要归因于c-BN@MoS₂明显加快了Fe³⁺到Fe²⁺的转变, 导致更多?OH产生, 达到增强降解污染物的目标.     

二硫化锡纳米片阻变存储器的制备与性能

采用水热法合成了尺寸为50~100 nm的二硫化锡纳米片,并首次以二硫化锡作为阻变层材料的阻变存储器（Cu/PMMA/SnS₂/Ag,PMMA=聚甲基丙烯酸甲酯）,对其阻变性能进行了研究。结果表明： Cu/PMMA/SnS₂/Ag阻变存储器的开关比约10⁵,耐受性2.7×10³。在上述2项性能指标达到较优水平的同时,开态与关态电压分别仅约为0.28与-0.19 V。     

Cu/MoS2的熔盐电解法制备及其在碱性条件下析氢反应性能的提高

通过熔盐电解法并掺杂过渡金属Cu制备2种不同纳米结构的Cu/MoS_2。采用涂敷法制备工作电极,通过X射线衍射(XRD)、透射电子显微镜(TEM)、能量散射X射线谱(EDS)、扫描电子显微镜(SEM)、选区电子衍射(SAED)以及各种电化学手段验证了其结构和性能。结果表明,纳米片状Cu/MoS_2在碱性溶液(1 mol·L~(-1)KOH)中表现出优异的析氢催化性能:在电流密度为10 mA·cm~(-2)时过电位为199.6 mV,Tafel斜率为59 mV·dec~(-1),双电层电容为26.1 mF·cm~(-2),等效电荷转移电阻为12.4Ω,具有较为良好的电化学耐久性和稳定性。     

Production of Alkyl Aryl Sulfides from Aromatic Disulfides and Alkyl Carboxylates via a Disilathiane–Disulfide Interchange Reaction

The results of this study show that disilathiane is an effective mediator in the synthesis of alkyl aryl sulfides with disulfides and alkyl carboxylates. Mechanistic studies suggest that disilathiane promotes cleavage of the sulfur–sulfur bond of disulfides to generate thiosilane as a key intermediate. Diselenides were also applicable to this transformation to produce the corresponding selenides.